ESi Cylinder Thermostat
The ESi Controls Clamp-on Cylinder Thermostats are configured specifically for the control of the domestic hot water cylinder to suit householder lifestyles and is suitable for both un-insulated and foam lagged cylinders.
The ESCTS can be used to switch directly a wet central heating circulating pump or boiler, or to operate zone valves. The bimetallic sensor ensures accurate hot water temperature control, whilst the large clear adjustable dial is easy to read and adjustable between 0ºC and 80ºC. The ESCTS can provide energy savings when set between the recommended 60ºC and 65ºC.
The Cylinder Thermostat is very easy to fit and is designed for surface mounting on domestic hot water cylinders or tanks. The ESCTS can also be mounted on the pipe, and comes supplied complete with both an extra-long mounting strap (and hooks) for the even the largest cylinders and a spring for the heating pipes.
Yes all our products come with a guarantee.
Guarantees or warranties vary, by product and manufacturer.
All our products are guaranteed for a minimum of 1 year (radiators 10 years, copper tube 25 years) but many offer longer warranties from the manufacturer, which you may need to register for.
On each product, under the specification tab, you will find more information on the guarantee or Warranty.
Follow links through to various manufacturers sites, as each manufacturer will have its own terms and conditions for qualifying for longer warranties.
You do not want to miss out by getting the wrong installer for some boilers etc.
As Boilers and radiators are installed by third parties, they do have to install in compliance with regulations and manufacturer standards to get the full benefit of the warranty.
As long as these ar fulfilled, you will get the maximum life and support from your new purchase.