Combination Economy 7 1075 x 450 Indirect Copper Cylinder

£340.04 Excl. VAT £408.05 Incl. VAT Best Buy

Availability: In stock

Economy 7 indirect combination cylinders are especially suitable for properties without loft space, e.g. flats, bungalows and bedsits. Designed to be used in conjunction with a central heating system, this single 1075 x 450mm cylinder combines a cold water cistern and a hot water tank reducing installation costs by eliminating the need for a cold water storage tank.

  • Grade 3 lagging

  • Hot water capacity: 115 litres

  • Cold water capacity: 20 litres

  • Metric size: 1075 x 450

  • Imperial size: 42 x 18

  • Recovery: 20 mins (approx) on a fully pumped system

Please note: Cylinder images are representative only, and tappings may vary.
RM Cylinders
Manufacturer Product Number
Manufacturers Warranty
1 Year (Subject to Manufacturers T&C's)
Cylinder Type
Combination / Fortic
Cylinder Material
Copper Cylinder
Product Questions
How do I know if I need a vented or unvented copper storage cylinder? I have Economy 7 tariff.
The type of cylinder required depends on the your system setup. If the cylinder is fed by a cold water loft tank then you will require a vented cylinder. Whereas if you the cylinder is fed directly from the mains water in to the property then you will require an unvented cylinder.
Was this answer helpful?
Yes | No
are the dimensions with lagging if not what do you add for lagging, what are the pipe fitting sizes
The dimensions of the vented foam lagged cylinders on our website are for just the cylinder as this is how the manufacturer lists them. The lagging is 35mm on standard cylinders and 50mm on economy 7 cylinders. So for standard cylinders you need to add 70mm to the width (35mm each side) and for the economy 7 cylinders you need to add 100mm to the width (50mm each side). The immersion heater connection is 2.1/4" and the other pipe connections are generally 1" but on some of the larger size cylinders the connections are 1.1/4"
Was this answer helpful?
Yes | No
Are your products guaranteed?

Yes all our products come with a guarantee.

Guarantees or warranties vary, by product and manufacturer.

All our products are guaranteed for a minimum of 1 year (radiators 10 years, copper tube 25 years) but many offer longer warranties from the manufacturer, which you may need to register for.

On each product, under the specification tab, you will find more information on the guarantee or Warranty.

Follow links through to various manufacturers sites, as each manufacturer will have its own terms and conditions for qualifying for longer warranties.

You do not want to miss out by getting the wrong installer for some boilers etc.

As Boilers and radiators are installed by third parties, they do have to install in compliance with regulations and manufacturer standards to get the full benefit of the warranty.

As long as these ar fulfilled, you will get the maximum life and support from your new purchase.

Was this answer helpful?
Yes | No
What is the difference between a Vented and an Unvented Cylinder?

The main difference between a vented and unvented water storage cylinder is that an unvented hot water cylinder takes its water supply directly from the mains.

Whereas a vented cylinder is connected to a water tank by a vent pipe

You can get hot water out of an unvented cylinder at a much better pressure than a traditional vented cylinder as it is pressurised.

Was this answer helpful?
Yes | No
Can't find an answer? Search all FAQ’s here
Currently on desktop site. Click here to view mobile site.