uvgold2 210 L Twin Coil Unvented Hot Water Storage Cylinder & Kit
The uvgold2 210L twin coil indirect stainless steel unvented cylinder has been specifically designed for use with most makes of solar systems, which are becoming increasingly popular in the UK. The benefits of environmentally friendly solar systems and twin coil uvgold2 cylinders include lower running costs, reduced carbon emissions and reduced energy bills.
- 210 litre capacity
- Twin coil for maximum heat gain
- KIWA approved and rigorously tested
- 25 year cylinder guarantee
Components and connections
- 22mm cold feed
- 4x 22mm internal twin coil connections
- Sensor pocket retaining bungs
- Inlet control set
- Temperature relief valve
- Imersion heater 3kw
- Dual thermostat
- Single high limit stat
- 1x two port zone valve
- 18L expansion vessel
Yes all our products come with a guarantee.
Guarantees or warranties vary, by product and manufacturer.
All our products are guaranteed for a minimum of 1 year (radiators 10 years, copper tube 25 years) but many offer longer warranties from the manufacturer, which you may need to register for.
On each product, under the specification tab, you will find more information on the guarantee or Warranty.
Follow links through to various manufacturers sites, as each manufacturer will have its own terms and conditions for qualifying for longer warranties.
You do not want to miss out by getting the wrong installer for some boilers etc.
As Boilers and radiators are installed by third parties, they do have to install in compliance with regulations and manufacturer standards to get the full benefit of the warranty.
As long as these ar fulfilled, you will get the maximum life and support from your new purchase.
The main difference between a vented and unvented water storage cylinder is that an unvented hot water cylinder takes its water supply directly from the mains.
Whereas a vented cylinder is connected to a water tank by a vent pipe
You can get hot water out of an unvented cyinder at a much better pressure than a traditional vented cylinder as it is pressurised.