uvgold2 250L Pre-Plumbed Unvented Hot Water Storage Cylinder

£831.79 Excl. VAT £998.15 Incl. VAT Best Buy

Availability: In stock

The uvgold2 pre-plumbed 250L indirect stainless steel unvented cylinder is designed as a 'plug and go unit, pre-loaded with all the necessary items for installation. Fitting is fast as there's no need for an electrician and all component parts are easily accessible. It comes with a pump, 7-day programmer and room thermostat, plus a central heating expansion pack.



  • 250 Litre

  • Easifit plug-in electrical connections

  • Automatic bypass valve fitted as standard

  • 25 year guarantee


Components and Connections.



  • 22mm hot water draw-off

  • Inlet control set

  • Temperature Relief Valve

  • Cold feed drain elbow

  • Immersion heater 3kw

  • Secondry immersion heater 3kw (250L & 300L only)

  • Dual thermostat

  • 22mm auto bypass valve

  • Circulating pump

  • Central heating flow 1x two port zone valve

  • Filling loop flexible hose

  • Manual bottle air eliminator

  • 22mm DHW two port zone valve

  • 28mm return from the radiator circuit

  • 28mm return to the boiler

  • Wiring Centre

  • Tundish

  • Secondry return (210L, 250L & 300L only)

  • DHW drain

  • 1x 18L grey expansion vessel for heating

  • 1x 18L white expansion vessel for potable

Weight
65.0kg
Manufacturer
uvgold
Manufacturer Product Number
UVG2-EN250P4EUP
EAN
5034499104593
Manufacturers Warranty
25 Year (Subject to Manufacturers T&C's)
Cylinder Type
Unvented
Cylinder Material
Stainless steel Cylinder
Water capacity (Litres)
250 Litres
Height (Metric)
1719mm
Width (Metric)
550mm
Manufacturers brochure PDF File
User Guide File
Unvented-Technical-Data_45.pdf
Installation PDF File
Product Questions
How do I know if I need a vented or unvented copper storage cylinder? I have Economy 7 tariff.
The type of cylinder required depends on the your system setup. If the cylinder is fed by a cold water loft tank then you will require a vented cylinder. Whereas if you the cylinder is fed directly from the mains water in to the property then you will require an unvented cylinder.
Was this answer helpful?
Yes | No
Which pump is fitted to the pre-plumbed cylinder and what else is different on the system fit cylinder to justify the price difference ?
The pre-plumbed cylinders come with a Wilo PUMPWYPERP circulating pump fitted to the cylinder, the pre-plumbed cylinders also come with a second expansion vessel and a electronic programmable room thermostat including domestic hot water timer which are not included with the system-fit cylinders. A pre-plumbed cylinder is for use with a heat only boiler, also known as a regular, conventional or open vent boiler where as the system-fit cylinders are for use with a sytem boiler.
Was this answer helpful?
Yes | No
Are your products guaranteed?

Yes all our products come with a guarantee.

Guarantees or warranties vary, by product and manufacturer.

All our products are guaranteed for a minimum of 1 year (radiators 10 years, copper tube 25 years) but many offer longer warranties from the manufacturer, which you may need to register for.

On each product, under the specification tab, you will find more information on the guarantee or Warranty.

Follow links through to various manufacturers sites, as each manufacturer will have its own terms and conditions for qualifying for longer warranties.

You do not want to miss out by getting the wrong installer for some boilers etc.

As Boilers and radiators are installed by third parties, they do have to install in compliance with regulations and manufacturer standards to get the full benefit of the warranty.

As long as these ar fulfilled, you will get the maximum life and support from your new purchase.

Was this answer helpful?
Yes | No
What is the difference between a Vented and an Unvented Cylinder?

The main difference between a vented and unvented water storage cylinder is that an unvented hot water cylinder takes its water supply directly from the mains.

Whereas a vented cylinder is connected to a water tank by a vent pipe

You can get hot water out of an unvented cylinder at a much better pressure than a traditional vented cylinder as it is pressurised.

Was this answer helpful?
Yes | No
Can't find an answer? Search all FAQ’s here
Currently on desktop site. Click here to view mobile site.