ESi 1 Channel Multi Purpose Programmer

£21.45 Excl. VAT £25.74 Incl. VAT Best Buy

(1 review)

Date
Score
Customer Comment
22-Sep-2016
Simple 1 channel device.
Clear display, easy install (direct swap on a standard 1 gang back box)
, logical operation. Perfect for simple combi boiler control.
Note, if you have separate hot water heating (not combi) you will need a 2 channel device.

Availability: In stock

This programmer can automatically switch your Central Heating or Hot Water ON and OFF up to 3 times a day, at whatever times you choose. Timekeeping is maintained through power interruptions by a non replaceable battery designed to last for the lifetime of the programmer and the clock is automatically put forward 1 hour at 1:00am on the last Sunday of March and back 1 hour at 2:00am on the last Sunday of October. The clock is factory pre-set to UK time and date, but you can alter it if you wish. During installation, the installer selects 24 hour, or 5 day/ 2day, or 7 day programming and 2 or 3 on/off periods per day, via a 4 position DIP switch on the back of the unit (see installation instructions).


The large, easy to read display makes programming easy and the unit is designed to eliminate the possibility of accidental changes to your programme. Buttons normally visible, only affect your set programme temporarily. All buttons which can permanently change your programme are located behind the flip over facia.



  • The 24 hour programmer option runs the same programme every day.

  • The 5/2 Day programmer option allows different ON/OFF times at weekends.

  • The 7 Day programmer option allows different ON/OFF times for each day of the week.

Weight
250g
Boiler Accessories
Boiler Controls
Manufacturer
ESi Controls
Manufacturer Product Number
ES1247B
EAN
0753677550827
Manufacturers Warranty
3 Years (Subject to Manufacturers T&C's)
Type of control
Programmer
Connection type
Wired
Installation PDF File

(1 review)

Date
Score
Customer Comment
22-Sep-2016
Simple 1 channel device.
Clear display, easy install (direct swap on a standard 1 gang back box)
, logical operation. Perfect for simple combi boiler control.
Note, if you have separate hot water heating (not combi) you will need a 2 channel device.