
Water Storage
There are two main types of water storage cylinder: direct and indirect.
Direct cylinders are a standard hot water tank found in most homes, with water sourced from a cold water tank usually in the loft or roof space. This type of cylinder is used when water for washing from the cylinder circulates directly through the boiler. There is no heating coil, so the water is heated directly by the immersion heaters located inside the cylinder – often meaning the recovery time is longer than with an indirect cylinder.
Indirect cylinders are used where water that’s used to heat the boiler and radiators is used to heat the hot water in the cylinder, but is kept totally separate from the water used for washing in the cylinder. Water from the boiler and radiators continuously re-circulates through the coil in the cylinder to heat the water, but never comes into direct contact with the water used for washing. These cylinders normally operate at around 80°C.

HeatWave 12 Litre Heating Expansion Vessel

HeatWave 18 Litre Heating Expansion Vessel

HeatWave 24 Litre Heating Expansion Vessel

HeatWave 35 Litre Heating Expansion Vessel

HeatWave 60 Litre Heating Expansion Vessel

CLEARANCE - Imera Expansion vessel (Heating) 5 Litre

BiWorld 1/2" Mechanical Type Shock Arrestor

HydroGuard 0.16 L Stainless Steel Shock Arrestor

ESi Mechanical Dual Cylinder Thermostat

ESi Electronic Dual Cylinder Thermostat

Ideal 900 X 400 Indirect Stainless Steel Vented Cylinder

Ideal 900 X 450 Indirect Stainless Steel Vented Cylinder

Ideal 1050 X 400 Indirect Stainless Steel Vented Cylinder

Ideal 1050 X 450 Indirect Stainless Steel Vented Cylinder

Ideal 1200 X 450 Indirect Stainless Steel Vented Cylinder

ESi Cylinder Thermostat

11" Copper Immersion Heater

27" Copper Immersion Heater

36"Copper Immersion Heater

11" Replacement Immersion Heater Dual Safety Thermostat

18" Replacement Immersion Heater Dual Safety Thermostat

7" Replacement Immersion Heater Dual Safety Thermostat

11" Incoloy Immersion Heater

27" Incoloy Immersion Heater

36" Incoloy Immersion Heater

2.1/4" Immersion Blanking Plug & Washer

1" Brass Plug

1" Brass Cap

Endfeed 22 mm x 1" Straight Cylinder Union
