Water Storage
There are two main types of water storage cylinder: direct and indirect.
Direct cylinders are a standard hot water tank found in most homes, with water sourced from a cold water tank usually in the loft or roof space. This type of cylinder is used when water for washing from the cylinder circulates directly through the boiler. There is no heating coil, so the water is heated directly by the immersion heaters located inside the cylinder – often meaning the recovery time is longer than with an indirect cylinder.
Indirect cylinders are used where water that’s used to heat the boiler and radiators is used to heat the hot water in the cylinder, but is kept totally separate from the water used for washing in the cylinder. Water from the boiler and radiators continuously re-circulates through the coil in the cylinder to heat the water, but never comes into direct contact with the water used for washing. These cylinders normally operate at around 80°C.
Flow-Thru 60L Composite Accumulator Tank
Flow-Thru 80L Composite Accumulator Tank
Flow-Thru 150L Composite Accumulator Tank
Flow-Thru 200L Composite Accumulator Tank
Flow-Thru 80 L Accumulator Tank
Flow-Thru 170 L Accumulator Tank
Flow-Thru 325L Steel Accumulator Tank
C2 Lite 200 Litre Composite Accumulator Tank
C2 Lite 250 Litre Composite Accumulator Tank
C2 Lite 300 Litre Composite Accumulator Tank
C2 Lite 350 Litre Composite Accumulator Tank
Challenger 200 L Accumulator Tank
Challenger 250 L Accumulator Tank
Challenger 300 L Accumulator Tank
Challenger 450 L Accumulator Tank
SuperFlow INT 500L Accumulator Tank
SuperFlow INT 750L Accumulator Tank




