Water Storage
There are two main types of water storage cylinder: direct and indirect.
Direct cylinders are a standard hot water tank found in most homes, with water sourced from a cold water tank usually in the loft or roof space. This type of cylinder is used when water for washing from the cylinder circulates directly through the boiler. There is no heating coil, so the water is heated directly by the immersion heaters located inside the cylinder – often meaning the recovery time is longer than with an indirect cylinder.
Indirect cylinders are used where water that’s used to heat the boiler and radiators is used to heat the hot water in the cylinder, but is kept totally separate from the water used for washing in the cylinder. Water from the boiler and radiators continuously re-circulates through the coil in the cylinder to heat the water, but never comes into direct contact with the water used for washing. These cylinders normally operate at around 80°C.
Stuart Turner Mainsboost MB 100S JKT
Order now for delivery within 10 working days
Stuart Turner Mainsboost MB 130S JKT
Order now for delivery within 10 working days
Stuart Turner Mainsboost MB 200S JKT
Order now for delivery within 10 working days
Stuart Turner Mainsboost MB 250S JKT
Order now for delivery within 10 working days
Stuart Turner Mainsboost MB 300S JKT
Stuart Turner Mainsboost MB 450S JKT
Order now for delivery within 10 working days
Stuart Turner Mainsboost MB 100SV-1-22
Order now for delivery within 10 working days
Stuart Turner Mainsboost MB 130SV-1-22
Order now for delivery within 10 working days
Stuart Turner Mainsboost MB 200SV-1-22
Stuart Turner Mainsboost MB 250SV-1-22
Order now for delivery within 10 working days
Stuart Turner Mainsboost MB 300SV-1-22
Stuart Turner Mainsboost MB 200SH-1-22
Order now for delivery within 10 working days
Stuart Turner Mainsboost MB 250SH-1-22
