Water Storage
There are two main types of water storage cylinder: direct and indirect.
Direct cylinders are a standard hot water tank found in most homes, with water sourced from a cold water tank usually in the loft or roof space. This type of cylinder is used when water for washing from the cylinder circulates directly through the boiler. There is no heating coil, so the water is heated directly by the immersion heaters located inside the cylinder – often meaning the recovery time is longer than with an indirect cylinder.
Indirect cylinders are used where water that’s used to heat the boiler and radiators is used to heat the hot water in the cylinder, but is kept totally separate from the water used for washing in the cylinder. Water from the boiler and radiators continuously re-circulates through the coil in the cylinder to heat the water, but never comes into direct contact with the water used for washing. These cylinders normally operate at around 80°C.
Stuart Turner Mainsboost MBP SAC
Stuart Turner Mainsboost Charger Vessel Mount (Vertical) MJ3 VM
Stuart Turner Mainsboost Charger Vessel Mount (Horiz) MJ3 HM
Stuart Turner Mainsboost iBoost +200
Stuart Turner Mainsboost Flomate MBF 100-1-15
Stuart Turner Mainsboost iBoost +200 CAT5
Stuart Turner Mainsboost Charger Wall Mount MBC 12-22 WM
Stuart Turner Mainsboost Charger Wall Mount MBC 12-28 WM
Stuart Turner Mainsboost iBoost F200-100-45
Stuart Turner Mainsboost iBoost F200-100-45 CAT5
Stuart Turner Mainsboost iBoost V200-100-45
Stuart Turner Mainsboost iBoost V200-100-45 CAT5
Stuart Turner Monsoon Professional Variable Speed Booster Pump
Stuart Turner Stormboost 60 Mains Water Boosting Pump
Stuart Turner Stormboost 80 Mains Water Boosting Pump
Stuart Turner Stormboost 100 Mains Water Boosting Pump
Stuart Turner Stormboost 200 Mains Water Boosting Pump




