Horizontal 900 X 450 Indirect Copper Cylinder
This 900 x 450mm horizontal indirect Copper cylinder is ideal for siting in a loft or attic, where space in a property is limited or if an existing cylinder cupboard is converted into a shower. Suitable for pumped systems only, an optional cradle set is available to enable rigid siting.
- Grade 3 foam lagging
- Capacity: 120 litres
- Metric size: 900 x 450
- Imperial size: 36 x 18
Please note: Cylinder images are representative only, and tappings may vary. Cradle sold separately.
Yes all our products come with a guarantee.
Guarantees or warranties vary, by product and manufacturer.
All our products are guaranteed for a minimum of 1 year (radiators 10 years, copper tube 25 years) but many offer longer warranties from the manufacturer, which you may need to register for.
On each product, under the specification tab, you will find more information on the guarantee or Warranty.
Follow links through to various manufacturers sites, as each manufacturer will have its own terms and conditions for qualifying for longer warranties.
You do not want to miss out by getting the wrong installer for some boilers etc.
As Boilers and radiators are installed by third parties, they do have to install in compliance with regulations and manufacturer standards to get the full benefit of the warranty.
As long as these ar fulfilled, you will get the maximum life and support from your new purchase.
The main difference between a vented and unvented water storage cylinder is that an unvented hot water cylinder takes its water supply directly from the mains.
Whereas a vented cylinder is connected to a water tank by a vent pipe
You can get hot water out of an unvented cyinder at a much better pressure than a traditional vented cylinder as it is pressurised.